Skip to main content

Soalan
Lazim

Hubungi
Kami

Maklum Balas
& Aduan

Peta
Laman

PENYELIDIKAN
KEJURUTERAAN

Skop Penyelidikan

Menjalankan penyelidikan dalam bidang kejuruteraan pertanian & makanan.
Membangunkan teknologi, prototaip dan pengetahuan dalam bidang kejuruteraan pertanian & makanan.
Menjadi pusat rujukan dalam bidang kejuruteraan pertanian & makanan.

Bidang Kepakaran

Mekanisasi Lepastuai & Pemprosesan Makanan
  • Mekanisasi sistem pengendalian lepas tuai hasil pertanian.
  • Membangun prototaip mesin untuk sistem pemprosesan makanan.
  • Mekanisasi sistem rantaian pemprosesan makanan berteknologi tinggi.
Mekanisasi Ladang
  • Mekanisasi sistem pengairan dan saliran pertanian berteknologi tinggi.
  • Susunatur infrastruktur ladang dan penambahbaikan struktur tanah untuk pergerakan mesin di tanah bermasalah (jerlus & gambut).
  • Prototaip automasi jentera dan implemen untuk sistem mekanisasi ladang.
  • Mekanisasi penggunaan sumber bio untuk penghasilan produk nilai tambah dan tenaga boleh diperbaharui.
  • Membangun pusat pengujian dan pensijilan jentera pertanian.
Pertanian Pintar & Tepat
  • Sistem pintar dan tepat untuk pengeluaran tanaman.
  • Semi-robotik dalam pengeluaran pertanian.
  • Teknologi pengesanan dan pengukuran untuk sistem automasi pengeluaran pertanian.
  • Struktur dan sistem kawalan pintar berdaya maju untuk pengeluaran tanaman tanah tinggi di tanah rendah.

Teknologi

  • PERTANIAN TEPAT DAN PINTAR
    SISTEM AMARAN AWAL SERANGGA PEROSAK BENAH PERANG

    Sistem amaran awal (EWS) dibangunkan untuk memantau kehadiran benah perang dan mencegah serangan teruk dengan mengambil kira faktor persekitaran seperti suhu, kelembapan relatif, dan taburan hujan. Sistem ini meningkatkan kecekapan pengesanan kebarangkalian wabak serangan benah perang pada tanaman padi sebanyak 50%.


     
    PERTANIAN TEPAT PADI

    Pertanian tepat padi menggabungkan teknologi yang canggih dan pengurusan yang cekap untuk mengurangkan penggunaan input seperti benih, baja dan racun perosak dan seterusnya menyumbang kepada penjimatan kos dan mengurangkan kesan buruk kepada alam sekitar.
    		 
    SISTEM PENYEJUKAN EVOPORATIF

    Sistem penyejukan evaporatif dibangunkan sebagai alternatif kepada trak sejuk yang mahal dan trak kanvas yang rendah kualiti, dengan menggunakan prinsip penyejatan air untuk menurunkan suhu dan meningkatkan kelembapan ruang penyimpanan. Sistem ini memerlukan tenaga, kos permulaan, dan kos operasi yang lebih rendah, serta mampu mengekalkan kualiti sayuran hingga 2 minggu pada suhu 5°C, mengurangkan kehilangan lepas tuai semasa pengangkutan dan penyimpanan.
     


    		SISTEM PENANAMAN SAYURAN SECARA VERTIKAL

    MARDI telah membangunkan satu struktur vertical kompak yang dinamakan sebagai TUBE Plot. Ia bertujuan untuk melaksanakan aktiviti pertanian bandar dengan mengeluarkan hasil yang berganda dan tidak memerlukan tanah yang luas.
    		 
    SISTEM FERTIGASI PINTAR BERASASKAN INTERNET BENDA

    Fertigasi Pintar adalah aplikasi berasaskan web yang dibangunkan untuk menguruskan sistem fertigasi dengan lebih berkesan menggunakan teknologi Internet Of Things (IoT). Sistem ini memberikan kombinasi air dan nutrien yang tepat terus ke zon akar setiap tanaman mengikut keperluan pertumbuhan pokok.
     

         		 SISTEM PENENTUAN KERATAAN TANAH

    Penyediaan dan pengurusan kerataan tanah sawah sebelum menabur benih padi adalah langkah kritikal untuk memastikan pengairan yang baik dan pertumbuhan tanaman yang optimal, di mana pembangunan sistem penentuan kerataan tanah secara sistematik dapat menyelesaikan masalah ini dan mengurangkan masa penanaman.
    		 

    SISTEM PENABURAN BENIH SECARA KADAR BOLEH UBAH

    Penentuan indeks kerataan tanah dilakukan dengan menggunakan penderia penerima GPS Trimble yang dipasang pada bajak putar dan traktor, serta diproses menggunakan perisian QGIS untuk menghasilkan indeks kerataan. Sistem ini menghasilkan ketepatan bacaan hingga ±2 cm pada paksi menegak dan ±1 cm pada paksi mendatar, serta menghasilkan peta rawatan penaburan biji benih padi yang dibahagikan kepada kategori tinggi, rendah, dan rata.

    		  
     

    e-SIAAP - APLIKASI SISTEM AMARAN AWAL SERANGAN PEROSAK BENAH PERANG

    Benah perang (BPH) adalah serangga perosak utama tanaman padi yang boleh menyebabkan kerugian sehingga 60%, dan aplikasi e-SIAAP dibangunkan untuk memberi maklumat mengenai tahap risiko serangan BPH dalam 7 hari. Aplikasi ini meningkatkan keberkesanan pengesanan sebanyak 50% dan membantu petani mengambil tindakan pengawalan segera untuk mengelakkan kerugian.
  • MEKANISASI LEPAS TUAI
    PROSEDUR OPERASI STANDARD (SOP) PENGURANGAN KEHILANGAN LEPAS TUAI PADI

    Kementerian Pertanian dan Keterjaminan Makanan telah memberi mandat kepada MARDI untuk menjalankan kajian verifikasi kehilangan lepas tuai padi pada tahun 2015 – 2016 dan mengenal pasti kaedah-kaedah yang boleh mengurangkan kehilangan ini.
     
    SISTEM MEKANISASI LADANG BAGI PENGELUARAN TEMBIKAI

    Teknologi yang dibangunkan adalah penambahbaikan sistem pengeluaran tembikai secara konvensional sedia ada dengan memberi penekanan kepada penggunaan mekanisasi bagi operasi yang terpilih.
    		 
    SISTEM MEKANISASI LADANG PENGELUARAN UBI KELEDEK

    Hasil daripada penyelidikan yang telah dilaksanakan, Pusat Kejuruteraan MARDI telah membangunkan pakej kejenteraan ladang yang lengkap bagi membantu para petani yang terlibat dalam pengeluaran ubi keledek
    Pembajak piring
    Pembajak putar
    Jentera penanam
     

     

    MESIN KOMPOS

    Mesin kompos (Compo Bin) berkapasiti 15 kg dibangunkan untuk memproses sisa tanaman secara berterusan, dilengkapi dengan motor 25 W untuk menggaul sisa dan mempercepatkan proses pengkomposan.
    		 

    SISTEM MEKANISASI LADANG BAGI PENGELUARAN TEMBIKAI

    Teknologi yang dibangunkan adalah penambahbaikan sistem pengeluaran tembikai secara konvensional  sedia ada dengan memberi penekanan kepada penggunaan mekanisasi bagi operasi yang terpilih. Sistem mekanisasi ladang bagi pengeluaran tembikai terdiri daripada beberapa teknologi mekanisasi yang dipakejkan bermula daripada operasi penyediaan tanah hingga penuaian.

     

    APLIKASI MUDAH ALIH PROSEDUR OPERASI STANDARD (SOP) PENYELARASAN JENTUAI

    Prosedur Operasi Standard (SOP) telah dibangunkan untuk mengurangkan kehilangan lepas tuai padi pada tahap kurang daripada 5% ketika aktiviti penuaian. Bagi memudahkan operator atau mekanik menjalankan pemeriksaan semasa aktiviti penuaian dan penyelenggaraan jentuai, satu aplikasi mudah alih yang mengandungi SOP operasi dan SOP penyelenggaraan telah dibangunkan. Aplikasi mudah alih ini terdiri daripada senarai semak pemeriksaan keadaan plot dan spesifikasi teknikal jentuai. Ia juga mengandungi senarai semak untuk penyelenggaraan jentuai bagi memastikan jentuai diselaraskan berdasarkan SOP terlebih dahulu sebelum di bawa ke lapangan.

     
  • MEKANISASI LADANG
    SISTEM 4 SEPARA RANTAI UNTUK TRAKTOR

    Sistem 4 separa rantai untuk traktor digunakan bagi mengurangkan kerosakan kepada lapisan keras tanah sawah padi dengan meningkatkan keluasan kawasan sentuhan dengan tanah dan mengurangkan tekanan kepada tanah.    		  
     
    		PEMBAJAK ALUR SUBPERMUKAAN (MOLE DRAIN)

    Pembajak alur subpermukaan merupakan implemen yang dipasang pada traktor dan berfungsi untuk mengeluarkan air bertakung dalam petak sawah. Teknologi dibangunkan bertujuan mengatasi masalah tanah jerlus di sawah.
    		 
    IMPLEMEN 3 DALAM 1: MEMBUAT BATAS, MEMBAJA DAN MENGAWAL RUMPAI

    Implemen pembatas piring 3 dalam 1 telah dibangunkan bagi membantu aktiviti pertanian di ladang. Implemen ini digunakan untuk membuat batas tanaman, membaja dan merumpai secara serentak.
    		   
     
    		GROUSERS RINGAN UNTUK TREK PERTANIAN: PENYELESAIAN BAHARU UNTUK MASALAH TANAH LEMBUT

    Polyoxymethylene (POM) dipilih sebagai tapak sistem trek berantai kerana ringan, ketegaran tinggi, ketahanan impak, rintangan lelasan, dan kestabilan hidrolisis, dengan kegelinciran bawah 20% dan kejerlusan kurang 30 cm.
  • PEMPROSESAN MAKANAN

    ALAT PEMBENTUK KUIH PENERAM

    Alat pembentuk kuih peneram dibangunkan dengan memberi fokus untuk meningkatkan kapasiti pengeluaran, penghasilan kualiti produk yang konsisten dan bersih, kos penghasilan yang rendah, ringan, mudah dibawa dan mudah dibersihkan serta tidak memerlukan kemahiran untuk mengendalikannya.

    		     
     
    		ALAT MINI LEMANG MARDI

    Alat mini lemang MARDI merupakan alat untuk memasak lemang bagi kegunaan pada peringkat domestik.
    		 
    KETUHAR LEMANG

    Teknologi Ketuhar Lemang dibangunkan untuk memastikan keaslian rasa, kebersihan, kecekapan operasi, dan kos pengeluaran, serta dilengkapi dengan sistem pemanas elektrik atau gas untuk mengawal kualiti dan keseragaman produk berbanding kaedah konvensional.    		    
     

    ALAT PENYAHIDRATAN MADU KELULUT

    Alat penyahidratan madu kelulut dibangunkan untuk menurunkan kandungan kelembapan madu ke julat kelembapan yang sesuai.

Penerbitan

  1. Nasir, M. N. M., Nordin, I. N. A. M., Faudzi, A. A. M., Muftah, M. N., Yusoff, M. A. M., & Mohamaddan, S. (2023, March 1). Modeling and Position Control of Fiber Braided Bending Actuator Using Embedded System. Applied Sciences, 13(5), 3170. https://doi.org/10.3390/app13053170
  2. Sairi, M., Ghazali, N. S., Ying, J. C. L., Basri, M. S. H., Ramli, S. H. M., Mail, M. F., Noh, A. M., Sahari, Y., Azizan, M. S., Amin, M. Z. M., Hamzah, A., Noor, A. M., Hamid, M. A. A., Muhsin, N. I., Tawakkal, M. H. M. A., Shamsulkamal, A. R., Alwi, S., Abidin, M. Z. Z., Jamaluddin, M. A., . . . Sani, M. A. (2023, May 3). Performance Assessment of Evaporative-Cooled Storage System in Short-Term Storage of Fruit Vegetables during Transportation. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000351
  3. Azizan, S. A., Azman, W. M. F. W., Rahim, A. A., Sairi, M., Teoh, C. C., & Rani, R. A. (2023, April 19). Performance Evaluation of Watermelon Juice Extracting Machine. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000350
  4. Arina Mohd Noh; Fauzan Ahmad; Mohd Zul Fadzli Marzuki; Mohd Daniel Haziq Abdul Rashid (2023). CFD Simulation In High-Density Planting System Inside A Container-Type Plant Factory. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  5. Ten, S. T., Shafie, K. A., Abdul Rani, R., et al. (2023). Review of smart agriculture at MARDI by Agricultural Revolution 4.0. Adv Agri Food Res J 2023; 4(1): a0000352. https://doi.org/10.36877/aafrj.a0000352
  6. Anuar Abdullah; Rohazrin Abdul Rani; Wan Mohd Aznan B. Wan Ahamad; Hafidha Azmon; Mohd Fazly Mail;Mohd Shahmihaizah Mat Jusoh; Mohamad Fakhrul Zaman Omar; Mohd Nadzim Nordin; Khairul Idzwan Ayub; Mohd Fadly Abdull Rasid; Norahshekin Abdul Rahman (2023). Development of a Mechanical Weeding and Fertilizing Machine For Watermelon Production. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  7. Mohd Shahmihaizan Mat Jusoh; Mohd Nadzim Nordin; Hafidha Azmon; Adli Fikri Ahmad Sayuti; Eddy Herman Sharu (2023). Performance Evaluation Of A Root Ball Pedestrian Type Transplanter On Ginger Planting. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  8. Mail, M. F., Maja, J. M., Marshall, M., Cutulle, M., Miller, G., & Barnes, E. (2023, April 26). Agricultural Harvesting Robot Concept Design and System Components: A Review. AgriEngineering, 5(2), 777–800. https://doi.org/10.3390/agriengineering5020048
  9. Adli Fikri, S. and Khusairy, K. (2023). Development of track-based system for tractor, paddy transplanter and high clearance prime mover in paddy field. Trop. Agric. and Fd. Sc. 51.
  10. Sahari, Y., Anuar, M. S., Mohd Nor, M. Z., & Abdul Ghani, N. H. (2023, November). Characterization of single and hybrid mode drying of desiccated coconut. Journal of Food Engineering, 357, 111628. https://doi.org/10.1016/j.jfoodeng.2023.111628
  11. Sahari, Y., Anuar, M. S., Mohd Nor, M. Z., Abdul Ghani, N. H., & Mohd Tahir, S. (2023, July 27). Progress, Trends and Development of Drying Studies on Coconut Kernel Products: A Review. Pertanika Journal of Science and Technology, 31(5), 2621–2644. https://doi.org/10.47836/pjst.31.5.30
  12. Md Isa, M. F., Hussein, A., Mohd Nazer, N. S., Ahmad, M. T., Khadzir, M. K., Omar, M. F. Z., & Sharu, E. H. (2023, December). Reviews of soft soil phenomena in rice cultivation at MADA, Kedah, Malaysia: Charactization and approaches. Physics and Chemistry of the Earth, Parts a/B/C, 132, 103492. https://doi.org/10.1016/j.pce.2023.103492
  13. Mhd Yusoff, M. A., & Mohd Faudzi, A. A. (2023, November 30). A Systematic Review of Soft Actuators in Agriculture. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000417
  14. Wan Mohd Aznan Wan Ahamad; Mohd Shahmihaizan Mat Jusoh; Mohd Nadzim Nordin; Mohd Fadly Abdull Rasid ; Khairul Idzwan Ayub; Wan Mohd Syafiq Wan Harun (2023). Performance Evaluation of Improved Mini Round Baler in Collection of Rice Straw. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  15. Eddy Herman Sharu; Mohd Taufik Ahmad; Mohd. Khusairy Khadzir; Mohd Shahril Shah Mohd Ghazali (2023). Preliminary Study of Performance Evaluation Of 6-Rows Autonomous Rice Transplanter International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  16. Mohd Nadzim Nordin; Mohd Shahmihaizan Mat Jusoh; Teoh Chin Chuang; Hafidha binti Azmon; Nor Hazlina Binti Mat Sa'at; Rahayu Binti Anang; Wan Rozita Binti Wan Engah; Ahmad Kamil Zolkafli; Mohd Khairil Izani Ishak (2023). Development Of Cropify: Mobile Application For Crop Cultivation, Notification And Alert System. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  17. Adli Fikri Ahmad Sayuti; Rohazrin Abdul Rani; Mohd Nadzim Nordin; Mohd Shahmihaizan Mat Jusoh; Mohd Shukry Hassan Basri; Mohd Khusairy Khadzir (2023). Priliminary Study Of Coffee Harvesting Tool For Liberica Variety Coffee. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  18. F. Z. Omar, M. A. Mhd Bookeri, M. T. Ahmad, B. Abu Bakar, M. Z. K. Abdullah, & W. M. S. Wan Harun. (2023, November 30). The Impact of Land Preparation Operations on the Land Leveling Index Status in a Rice Field. Advanced and Sustainable Technologies (ASET), 2(2). https://doi.org/10.58915/aset.v2i2.340
  19. Wan Mohd Aznan, W. A., Mohd Shahmihaizan, M. J. and Mohd Romainor, M.(2023). The influence of moisture content and raw material size on the mechanical and calorific properties of rice husk pellets. J. Trop. Agric. and Fd. Sc. 51, No 2 (2023).
  20. Siti Noor Aliah, B., Rohazrin, A. R., Zakaria, N. K., Mohd Nizam, Z., Muslimin, J., Mohd Nadzim, N.,Muhammad Hariz, M., Ismail, R., Mohamad Saiful, N. A., Bunyamin, A. K., Adli Fikri, A. S., Ahmad,M. T. and Abu Bakar, B. (2023). Comparative performance of fertilizer application using unmanned aerial spraying system and boom sprayer on MD2 pineapple crop. J. Trop. Agric. and Fd. Sc. 51 (2)(2023): 87 – 94
  21. Muhammad Haniff Ahmad; Mohd Khusairy Khadzir (2023). Evaluation Of Multiple Well System In Shallow Aquifers For Paddy Irrigation. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  22. Mohd Khusairy Khadzir; Rohazrin Abdul Rani; Adli Fikri Ahmad Sayuti; Mohd Haniff Ahmad.(2023). Grain corn cultivation: A potential mechanization system package for Malaysia grain corn Production. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  23. Shahril Shah bin Mohamad Ghazali*; Mohammad Aufa bin Mhd. Bookeri; Muhammad Haniff bin Ahmad; TS Mohd Khusairy bin Khadzir; Azlan bin Othman; Nuraini binti Ahmad Ariff Shah; Wan Mohd Syafiq bin Wan Harun; Mohamad Fakhrul Zaman bin Omar; Dr. Teoh Chin Chuang; Mohd Taufik bin Ahmad; Hafidha bin Azmon; Azzami Adam bin Muhamad Mujab; Mohd Khalid bin Ahmad; Mohd Hafiz bin Mohd Yusoff; Muhammad Naim Fadzli bin Abd Rani; Dr. Siti Norsuha binti Misman; Mohd Fitri bin Masarudin; Dr. Hairazi bin Rahim @ Abdul Rahim.(2023). Preliminary Study On Tray Seeding Machine In Rice Nursery Centre In Mardi Parit. International Journal of Agriculture, Forestry and Plantation, Vol. 13 (Sept) ISSN 2462-1757
  24. Mohamad Jani, S. (2023). Utilisation of rice straw activated carbon in treatment of POME using adsorption method. J. Trop. Agric. and Fd. Sc. 51 (2)(2023): 1 – 9
  25. Ho, S., & Saad, M. J. (2022). A Review on Heavy Metal and Dye Removal via Activated Carbon Adsorption Process. Asian Journal of Chemistry, 35(1), 1–16. https://doi.org/10.14233/ajchem.2023.24019
  26. Anuar Bahari, S., Nazarudin Zakaria, M., Osman, S., Abu, F., Jani Saad, M., & Hosseinpourpia, R. (2022). Strength Performance and Microstructure Characteristic of Naturally-Bonded Fiberboard Composite from Malaysian Bamboo (Bambusa vulgaris). Journal of Renewable Materials, 10(10), 2581–2591. https://doi.org/10.32604/jrm.2022.021313
  27. Sharu, E. H. (2021, July 2). Hydraulic Performance Analysis of Drip Irrigation System Using Pressure Compensated Dripper at Low Operating Pressure. Advances in Agricultural and Food Research Journal, 3(1). https://doi.org/10.36877/aafrj.a0000225
  28. Nur Khalidah, Z*., Muhd Akhtar, M.T., Nuraini, A.A.S., Seri ‘Aisyah, H., Siti Hawa, A.R., Mohamad Saiful Nizam, A., Mohd Daniel Hazeq, A.R., Mohd Shukry, H.B. and Muhamad Syahiran Afieff, A. (2022). Detection and maturity index classification for tomato: Deep learning with computer vision-based. J. Trop. Agric. and Fd. Sc. 50(2022): 1– 6
  29. Mohamad Noh, B., Razali, N. A., Teoh, C. C., & Sairi, M. (2023, April 10). Penggunaan Lengan Robot Dalam Penggredan Buah Tembikai. Advances in Agricultural and Food Research Journal, 4(1). https://doi.org/10.36877/aafrj.a0000307
  30. ZULKIFLI, N. A., CHUANG, T. C., KHIM, O. K., ABU BAKAR, N., ABDUL RAUF, U. F., & WAN YUNUS, W. M. Z. (2022, March 31). GREEN APPROACH OF RICE (MR 219) TREATMENT USING A 2-D CLINOSTAT: FACTORIAL DESIGN ANALYSIS. JOURNAL OF SUSTAINABILITY SCIENCE AND MANAGEMENT, 17(3), 51–59. https://doi.org/10.46754/jssm.2022.03.005
  31. Khadzir, M. K., Ahmad, M. T., Omar, M. F., & Mohd Ghazali, M. S. S. (2021, March 6). Evaluation of Lightweight Grousers for Agricultural Tracks: New Solution for Soft Soil Problem. Advances in Agricultural and Food Research Journal, 3(1). https://doi.org/10.36877/aafrj.a0000180
  32. Saad, Mohamad Jani & Chia, Chin-hua & Zakaria, Sarani & Sajab, Mohd Shaiful. (2022). APLIKASI KARBON TERAKTIF SEKAM PADI TERHADAP EFLUEN KILANG KELAPA SAWIT MENGGUNAKAN KAEDAH PENJERAPAN (Application of Rice Husk Activated Carbon on Palm Oil Mill Effluent using Adsorption Method). 26. 902-913.
  33. Noor Hasnan, N. Z., Basha, R. K., Amin, N. A. M., Ramli, S. H. M., Tang, J. Y. H., & Aziz, N. A. (2022, November). Analysis of the most frequent nonconformance aspects related to Good Manufacturing Practices (GMP) among small and medium enterprises (SMEs) in the food industry and their main factors. Food Control, 141, 109205. https://doi.org/10.1016/j.foodcont.2022.109205
  34. Adli Fikri Ahmad Sayuti, Rohazrin Abdul Rani, Mohd Taufik Ahmad. (2022). Design Concept of Auto-Feeder Device For Pineapple Transplanter. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept). Issue 2 ISSN 2462-1757
  35. Muhammad Haniff Ahmad; Mohd Khusairy Khusairy; Adly fikri Ahmad Sayuti; Rohazrin Abdul Rani. (2022). Evaluation Of Selected Irrigation System For Grain Corn Production System. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept). Issue 2 ISSN 2462-1757
  36. Mohamad Fakhrul Zaman Omar; Anuar Abdullah; Hafidha Azmon; Rohazrin Abdul Rani; Teoh Chin Chuang. (2022). Comparison Of Transplanting Methods For Watermelon Production. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept). Issue 2 ISSN 2462-1757
  37. Anuar Abdullah; Teoh Chin Chuang; Rohazrin Abdul Rani; Wan Mohd Aznan B. Wan Ahamad; Hafidha Azmon; Mohd Fazly Mail; Mohd Shahmihaizah Mat Jusoh; Mohamad Fakhrul Zaman Omar; Mohd Nadzim Nordin; Khairul Idzwan Ayub; Mohd Fadly Abdull Rasid; Norahshekin Abdul Rahman; Noraznal Mohd Zainal (2022). Design and Development of A Watermelon Harvesting and Collecting Machine. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept). Issue 2 ISSN 2462-1757
  38. Anuar Abdullah; Mazidah Mat; Wan Khairul Anuar Wan Ali; Nor Ahya Mahadi; Noor Azlina Masdor; Wahizatul Afzan Azmi; Khairul Idzwan Ayub; & Mohd Fadly Abdull Rasid. (2022). Preliminary Study on Design and Devel.opment of A Catch and Release Red Palm Weevil (RPW) Trap. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept). Issue 2 ISSN 2462-1757
  39. Mohammad Aufa Bin Mhd Bookeri; Badril Hisham Abu Bakar; Siti Noor Alliah Baharom. (2022). Spectral Imaging For Crop Care And Maintenance And Its Potential Use In Malaysia: A Review. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept). Issue 2 ISSN 2462-1757
  40. Mohd Nadzim Nordin; Mohd Shahmihaizan Mat Jusoh; Mohd Shahril Shah Mohamad Ghazali; Mohd Fadzil Mat Desa; Mohammad Aufa Mhd. Bookeri; Ahmad Kamil Zolkafli; Mohd Khairil Izani Ishak. (2022). Study On Distribution Pattern Of Drone Spreader By Different Altitude. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept). Issue 2 ISSN 2462-1757.
  41. Mohd Khusairy Khadzir; Mohammed Fauzi Isa; Chan Chee Seng; Mohd Shahril Shah Mohd Ghazali; Muhammad Aufa Mhd Bookeri; Muhammad Haniff Ahmad; Mohd Taufik Ahmad. (2022). The Evaluation of Crank type Rice Row Seeding Machine. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept). Issue 2 ISSN 2462-1757.
  42. Hafidha Azmon; Adli Fikri Ahmad Sayuti. (2022).  Preliminary Study of Planting Napier Grass Using Cassava Planter On Mineral Soil. International Journal of Agriculture, Forestry and Plantation, Vo. 12 (Sept). Issue 2 ISSN 2462-1757.
  43. Mhd Yusoff, M. A., Mohd Faudzi, A. A., Hassan Basri, M. S., Rahmat, M. F., Shapiai, M. I., & Mohamaddan, S. (2022, August 15). Switching Model Predictive Control for Thin McKibben Muscle Servo Actuator. Actuators, 11(8), 233. https://doi.org/10.3390/act11080233
  44. Mhd Yusoff, Mohd Akmal & Mohd Faudzi, Ahmad Athif & Basri, Mohd & Rahmat, Mohd. (2022). A Piecewise Affine System Modeling Approach of Thin McKibben Muscle Servo Actuator. 10.1007/978-981-19-2095-0_11.
  45. Abdul Rani, R., Nordin, M. N., Muslimin, J., Ahmad Sayuti, A. F., Baharom, S. N. A., & Zubir, M. N. (2022, December 31). Pineapple Crop Fertiliser Application Method: A Preliminary Study on the Performance and Effectiveness of a Boom Sprayer and a Sprayer Drone. Advances in Agricultural and Food Research Journal, 4(1). https://doi.org/10.36877/aafrj.a0000349
  46. Abu bakar, Badril & Baharom, Siti & Baharom, Alliah & Rani, Rohazrin & Ahmad, Mohd Taufik & Zubir, Mohd & Fikri, Adli & Sayuti, Ahmad & Nordin, Mohd & Aufa, Mohammad & Bookeri, Mhd & Fakhrul, Mohamad & Omar, Zaman & Muslimin, Jusnaini & Bujang, Ahmad & Zamri, Mohd & Abdullah, Khairi & Ismail, Ramlan & Musa, Muhammad & My,. (2023). A review of smart agricultural prime movers and its potential use for paddy and pineapple production in Malaysia. 10.13140/RG.2.2.18541.36323.
  47. Ab Jalil, N. A., Mokhtaruddin, N. A., Chia, C. H., Ahmad, I. K., Saad, M. J., & Sarif, M. (2022, November 26). Physical and Chemical Characteristics of Agricultural-Plastic Wastes for Feasibility of Solid Fuel Briquette Production. Sustainability, 14(23), 15751. https://doi.org/10.3390/su142315751
  48. Arina, M.N., Nuraini A.A.S, Muhammad Aufa M.B.3, Mohd Fitri M, Mohd Zul Fadzli M, Yuhanawati M.Y and Wan Mohd Syafik W.H. (2022). Development of e-SIAAP, an IoT based monitoring and forecasting application for brown planthopper (Nilaparvata lugens). Trop. Agric. and Fd. Sc. 50(2022)
  49. Chia, C. H., Zakaria, S., Sajab, M. S., & Saad, M. J. (2022, January 3). Activated Carbon Produced from Rice Husk by NaOH and KOH Activation and its Adsorption in Methylene Blue. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000297.
  50. Shahar, A., Wan Azman, W. F., Mohd Ramli, S. H. (2022, August 5). Effect of Different Drying Processing Method on the Physicochemical Properties of Watermelon Powder. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000305
  51. Sairi, M., Hassan Basri, M. S., Ghazali, N. S., Cho, J. L. Y., Mohd Noh, A., Sahari, Y., Mail, M. F., Azizan, M. S., Mohd Ramli, S. H., Mat Amin, M. Z., Hamzah, A., Mat Noor, A., Hamid, M. A. A., Muhsin, N. I., Mohd Amin Tawakkal, M. H., Shamsulkamal, A. R., Alwi, S., Zainol Abidin, M. Z., Jamaluddin, M. A., . . . Sani, M. A. (2021, August 30). Performance Evaluation of Truck Equipped with the Evaporative Cooling System during Transportation of Vegetable. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000244
  52. Masniza, S., Khairul Anuar, S., Ahmad Syazwan, I., Nur Azura, M.S., Noor Azlina, M., Nur Humaira, M.S., Ten, S.T., Siti Noraini, B., Mohd Afendy, A.T., Nur Sulastri, J., Izyani, R., (2021). Electrochemical Impedimetric Biosensor Based on Silicon-on-Insulator (SOI) Nanogap for the Detection of Banana Blood Disease Bacterium (BDB). Malaysian Journal of Analytical Sciences Vol 25 No 2 (2021), pp 184 – 192
  53. Mohd Ramli, S. H., Sahari, Y., Abdullah, N. F., Hashim, S. R., Abdul Rahman, A. F. W., Azizan, M. S., Azizan, S. A., Abd Karim, F., Shamsulkamal, A. R., & Sani, A. (2021, July 2). Properties of Grain Corn During Short Term Storage in Tropical Ambient Temperature. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000210
  54. Wan Azman, W. M. F. B., Shamsudin, R. B., Mohd Nor, M. Z. B., & Hamzah, A. B. (2021, January 12). Effect of Moisture Content on the Angle of Repose and Coefficient of Kinetic Friction of Sago Trunk (Metroxylon spp.). Advances in Agricultural and Food Research Journal, 2(1). https://doi.org/10.36877/aafrj.a0000179
  55. Wan Azman, W. M. F. B., Shamsudin, R., Mohd Nor, M. Z., & Hamzah, A. (2021, July 1). Evaluation and optimization of disc grating machine for sago starch production (Metroxylon spp.). Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000217
  56. Sahari, Y., Ramli, S. H. M., Adnan, A. S. M., Azizan, M. S., Rahim, A. A., Shafie, Z. M., & Nor, N. A. A. M. (2021). Drying Performance of Mobile Dryer and Physical Quality Assessment of Dried Shelled Corn. Journal of Advanced Agricultural Technologies, 7–12. https://doi.org/10.18178/joaat.8.1.7-12
  57. Abdul Wahid, R., Ang, W. L., Mohammad, A. W., Johnson, D. J., & Hilal, N. (2021, July 28). Evaluating Fertilizer-Drawn Forward Osmosis Performance in Treating Anaerobic Palm Oil Mill Effluent. Membranes, 11(8), 566. https://doi.org/10.3390/membranes11080566
  58. Khadzir, M. K., Shari, E. S., Ahmad, M. H., Abdul Rani, R., & Ahmad Sayuti, A. F. (2021, June 15). Evaluation of planting spacing and effects on the yield for Malaysia grain corn production. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000211
  59. Mohd Khusairy K., Adli Fikri A.S., Erwan Shah S., Muhammad Haniff A., Rohazrin A.R., Evaluation of land preparation for local grain corn production. International Journal of Agriculture, Forestry and Plantation, Vol. 12 (Sept) (2021) ISSN 2462-1757, page 39-42, ISSN 2462-1757
  60. Nurul Afza K., Noor Ismawaty N., Rozlaily Z., Thiyagu D., Anuar A., Wan Khairul Anuar W. A., Mohd Nazri B., Razean Haireen M. R., Faridah H., Rawaida R., Ishak H., Mohd Nazrul Hisyam D., Nur Syafini G., Zaulia O., Samsiah J., Khairuizah Hazila K., Tun Norbrilinda M. and Hanim A. (2021). Manual Teknologi Pengeluaran Ubi Keledek Lembayung. ISBN 978-967-936-713-3
  61. Mat Jusoh, M. S., Nordin, M. N., Wan Ahamad, W. M. A., & Hamid, M. A. (2021, July 2). Comparison Study on Fiber and Cocopeat from Young Coconut Husks and Old Coconut Husks. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000216
  62. Abdul Rani, R., Ahmad Sayuti, A. F., Khadzir, M. K., & Ahmad, M. H. (2021, July 2). Calibration and Performance Evaluation of Grain Corn Fertilizing Implement. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000227
  63. Omar, M. F. Z., Sani, M. A., Abbas, H., Buniamin, A. H., & Mhd Bookeri, M. A. (2021, July 24). A Laboratory Study on the Harvesting Force of Mangosteen (Garcinia mangostana L.) and Mesta Based on Maturity Indexes. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000251
  64. Nordin, M. N., Mat Jusoh, M. S., Abu Bakar, B. H., Hassan Basri, M. S., Kamal, F., Ahmad, M. T., Mail, M. F., Masarudin, M. F., Misman, S. N., & Teoh, C. C. (2021, January 4). Preliminary Study on Pesticide Application in Paddy Field using Drone Sprayer. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000147
  65. Nordin, M. N., Mat Jusoh, M. S., Abu Bakar, B. H., Ahmad, M. T., Mail, M. F., Tet Vun, C., Chin Chuang, T., Hassan Basri, M. S., & Zolkafli, A. K. (2021, June 30). Study on Water Distribution of Spraying Drone by different Speed and Altitude. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000215
  66. Mohd Fazly Mail,Hafidha Azmon, Mohd Shahmihaizan Mat Jusoh, Mohd Nadzim Nordin, Rohazrin Abdul Rani, Mohd Zubir Idris (2021). Design And Development Of A Low Land Cabbage Harvester Prototype, International Journal of Agriculture, Forestry and Plantation, Vol. 11 (June) 2021 ISSN 2462-1757
  67. Mail, M. F., Abdul Rahman, M. H., Baharom, N. A., Shahrun, M. S., & Mohd Daud, M. R. (2021, June 24). Development and Performance of Pyrolyzer for Production of Biochar and Wood Vinegar from Domestic Agriculture Farm Waste. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000212
  68. Azmon, H. A., Mail, M. F., Nordin, M. N., Hassan Basri, M. S., Abd Rahman, N., & Ab Rahim, S. A. (2021, July 4). Ergonomic Evaluation of Maize Seeding using Conventional Method and Lightweight Motorized Maize Seeder. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000231
  69. Ahmad, M. H. B., Teoh, C. C., Abdul Rani, R., & Hashim, H. (2021, January 3). Evaluation of Non-Irrigated and Irrigated For Grain Corn Cultivation During the Rainfed Season. Advances in Agricultural and Food Research Journal, 2(1). https://doi.org/10.36877/aafrj.a0000185
  70. Ahmad, M. H. B., Teoh, C. C., Sharu, E. H., Khadzir, M. K., Mat Nor, S., & Arshad, M. A. (2021, July 30). Water Recycling System: Sustainable Water Management Approach for Paddy Production. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000226
  71. Muhammad Haniff. A.; MohdKhusairy. K.; MohdShahril Shah. M.G et al. (2021) Effects Of Waterlogging On The Yield And Growth Performance Of Grain Corn Under Farm-Scale Production, International Journal of Agriculture, Forestry and Plantation,Vol. 12(Sept)ISSN 2462-1757
  72. Ahmad Sayuti, A. F., Abdul Rani, R., & Ahmad Sayuti, N. (2021, July 2). Preliminary Study of Pineapple Pruning Machine for Pineapple Suckers Production. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000208
  73. Ahmad, M.T., Omar, M. F. Z., Md Isa, M. F., Khaizir, M. K., Sharu, E.H., AM Hashim 2021, July 23). Effect of Mole drain and Tracked Agricultural Prime Movers on Soft Soil Paddy Areas. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000228
  74. Abu Bakar, B. H., Muslimin, J., Abd. Rani, M. N. F., Mhd Bookeri, M. A., Ahmad, M. T., Abdullah, M. Z. K., & Ismail, R. (2021, May 17). On-The-Go Variable Rate Fertilizer Application Method for Rice Through Classification of Crop Nitrogen Nutrition Index (NNI). ASM Science Journal, 15, 1–10. https://doi.org/10.32802/asmscj.2021.608
  75. Abu Bakar, B., Baharom, S. N. A., Abdul Rani, R., Ahmad, M. T., Zubir, M. N., Ahmad Sayuti, A. F., Nordin, M. N., Mhd Bookeri, M. A., & Muslimin, J. (2021, May 23). A Review of Mechanization and Automation in Malaysia’s Pineapple Production. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000206
  76. Baharom, S. N. A., Muslimin, J., Bakar, B. H. A., Rasid, M. Z. A., Ismail, R., Abdullah, M. Z. K., & Hassan, M. S. (2021) Baharom, S. N. A., Muslimin, J., Abu Bakar, B. H., Abdul Rasid, M. Z., Ismail, R., Abdullah, M. Z. K., & Hassan, M. S. (2021, August 4). Total Nitrogen Estimation of Paddy Soil Using Visible and Near Infrared Spectroscopy. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000232
  77. Roslan, M.E. Ya’acob, D. Jamaludin, Y. Hashimoto, M H Othman, A. Noor Iskandar, M. R. Ariffin, M. H. Ibrahim, J. Mailan, J. Hakiim, M. F. Mail, B. S. N. Aliah (2021), Dye-Sensitized Solar Cell (DSSC): Effects on Light Quality, Microclimate and Growth of Orthosiphon stamineus in Tropical Climatic Condition, Agronomy 2021, 11, 631.
  78. Mohd Noh, A., Mohd Tahir, M. A., & Shafie, K. A. (2021, August 24). Plant Factory Airflow Distribution Analysis with Different Inlet Configuration. Advances in Agricultural and Food Research Journal, 2(2). https://doi.org/10.36877/aafrj.a0000242
  79. Noh, A. M., Noor, H. M., & Ahmad, F. (2021, December 17). CFD Simulation of the Airflow Distribution Inside Cube-Grow. CFD Letters, 13(12), 81–89. https://doi.org/10.37934/cfdl.13.12.8189
  80. Ten, S. T., Krishnen, G., Khulidin, K. A., Mohamad Tahir, M. A., Hashim, M. H., & Khairudin, S. (2021, September 14). Automated Controlled Environment Mushroom House. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000230
  81. Leong, C. C., Ho, W. Y., Yeap, S. K., Krishnen, G., Chong, Z. X., Ho, J. S., Lim, P. T., & Ten, S. T. (2021, May 6). Assessment of phylogenetic, growth, and antioxidant capacity of Pleurotus spp. in Malaysia. Journal of Food Processing and Preservation, 45(6). https://doi.org/10.1111/jfpp.15554
  82. Mhd Bookeri, M. A., Masaruddin, M. F., Ahmad arif shah, N., Mohd noh, A., Samsuri, N. S., Abu bakar, B. H., & Khadzir, M. K. (2021, January 5). Evaluation of Light Trap System in Monitoring of Rice Pests, Brown Planthopper (Nilaparvata lugens). Advances in Agricultural and Food Research Journal, 3(1). https://doi.org/10.36877/aafrj.a0000187
  83. Yahya, S., Mohd Shahrir, A., Amir Syariffudden, M., Shafie, A., Mohammad Shukri, J., Mohd Zaimi, Z., & Amir Redzuan, S. (2020, December 27). A study of drying parameters on drying time and colour quality of grated coconut using tumbling mechanism in convective dryer. Supplementary 6, 4(S6), 64–69. https://doi.org/10.26656/fr.2017.4(s6).023
  84. Masniza, S., Amir Redzuan, S., Amir Syariffuddeen, M.A., Zaulia, O., Nur Biha, M.N., NuradiraSuhaime, Zulkifly, A.,(2020). Open-ended Coaxial Sensor for the Assessment of Physicochemical and Dielectric Properties of Watermelon. ASM Science Journal, Vol. 13, pp 9-19
  85. Masniza, S., Azhar, M.N., Mohd Fazly, M., Joanna, C.L.Y., Mohamad Abhar Akmal, H., Mohd Shahrir, A., Mohd Shukry, H.B., Nur Izzati, M., Nur Syafini, G., Sha'fie, A., (2020). Assessment of evaporative cooling system potential for short term storage management of vegetables during transportation. Journal of Agricultural and Food Engineering (JAFE), vol. 3, pp 0021
  86. Saad, M. J., Sajab, M. S., Wan Busu, W. N., Misran, S., Zakaria, S., Chin, S. X., & Chia, C. H. (2020, November 30). Comparative Adsorption Mechanism of Rice Straw Activated Carbon Activated with NaOH and KOH. Sains Malaysiana, 49(11), 2721–2734. https://doi.org/10.17576/jsm-2020-4911-11
  87. Saad, M. J., Chia, C. H., Misran, S., Zakaria, S., Sajab, M. S., & Abdul Rahman, M. H. (2020, September 30). Rice Husk Activated Carbon with NaOH Activation: Physical and Chemical Properties. Sains Malaysiana, 49(09), 2261–2267. https://doi.org/10.17576/jsm-2020-4909-23
  88. Sharifah Hafiza, M.R., Norazatul Hanim, M.R., (2020). The Effect of Mixing on the Aeration Structure of Kuih Bahulu  ASM Sc. J., 13, Special Issue 4, pp 45-52
  89. Wan Azman, W. M. F., Shamsudin, R., Mohd Nor, M. Z., Azman, S., & H., N. (2020, March 30). Effects of various grated sago sizes, steeping periods and trunk sections on sagostarch recovery (Metroxylon spp.). Food Research, 4(4), 1172–1180. https://doi.org/10.26656/fr.2017.4(4).053
  90. Wan Mohd Fariz, W.A., Rosnah, S., MohdZuhir, M.N., Azman, H., Mohd Shahrir, A., Faewati, A.K., Amir Redzuan, S., Mohammad Shukri, J., Mohd Azmirredzuan, S., Mohd Hafiz, M.A.T., Mohd Zaimi, Z. A., Muhammad Aliq, J., Sha'fie, A., (2020). The Assessment of Grated Sago Size Produced by Different Type of Grating Machine. NCAFM2018, ASM Sc. J., Vol.13, pp 59-66
  91. Mohd Khusairy K., Adli Fikri A.S., Erwan Shah S., Muhammad Haniff A., Rohazrin A.R., Development of Strip tillage cultivation technique for Malaysia grain corn production. IJAFP ISSN 2462-1757 International Journal of Agricultural, Forestry & Plantation (International Journal of Agriculture, Forestry and Plantation, Vol. 10 (Sept) (2020) (ISSN 2462-1757 )
  92. Abdullah, A. B., K, N. A., H, M. A., M J, S., Mail, M. F., A, K. I., A R, N., & M, Z. (2020, December 29). 3 In 1 Disc Ridger: Development of An Improved Implement For Sweet Potato Plant-Bed Making, Fertilizing and Mechanical Weeding. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000170
  93. Anuar A., Nurul Afza K., Wan Mohd Aznan W.A., Shahmihaizan M.J., Mohd Fazly M., Khairul Idzwan A. and Norahshekin A. R. (2020). Design and Development of a New Mechanization System for Sweet Potato Planting Material Production. International Journal of Agriculture, Forestry and Plantation, Vol. 10 (Sept.) ISSN 2462-1757
  94. Mat Jusoh, M. S., Wan Ahamad, W. M. A., Nordin, M. N., Hamid, M. A., Govindasamy, S. K., Mat, Z., & Abdul Rahman, N. (2020, October 31). Development of an Efficient Processing System for Young Coconut Husk. Advances in Agricultural and Food Research Journal, 1(2). https://doi.org/10.36877/aafrj.a0000124
  95. Rohazrin A.R, Adli Fikri A.S.,Zero tillage planting method, an overview of the potential for the production of grain corn in Malaysia, International Journal of Agriculture, Forestry and Plantation, Vol. 10 (Sept) 2020, ISSN 2462-1757
  96. Mohamad Fakhrul Z.O., Eddy Herman S.; MohdTaufik A., Mohammed Fauzi M.I.; MohdKhusairy K.; MohdShahril Shah M.G. and Nasarudin N.S. 2020. The Application of Mole Plough with Rope Applicator to Reduce Soft Soil Problem in Rice Field. International Journal of Agriculture, Forestry and Plantation, Vol. 10 pp 345 – 348
  97. Sharu, E. H., & Ab Razak, M. S. (2020, August 15). Hydraulic Performance and Modelling of Pressurized Drip Irrigation System. Water, 12(8), 2295. https://doi.org/10.3390/w12082295
  98. Sharu, E. H. (2020, December 28). Application of HEC-HMS Model for Flow Simulation for Dungun River Basin. Advances in Agricultural and Food Research Journal. https://doi.org/10.36877/aafrj.a0000169
  99. Mohd Fazly Mail, Hafidha Azmon, Mohd Shahmihaizan Mat Jusoh, Mohd Zubir Idris, Mohd Nadzim Nordin, Mohd Shahril Shah Mohamad Ghazali, A Tractor Mounted Implement for Plastic Film Laying on Cultivated Soil and Raised Seed Bed, International Journal of Agriculture, Forestry and Plantation, Vol. 10 (Sept) 2020, Pg 96-100, ISSN 2462-1757
  100. Mohd Fazly Mail, Hafidha Azmon , Mohd Shahmihaizan Mat Jusoh , Mohd Nur Hafiz Mat Azmin , Mohd Nadzim Nordin , Mohd Zubir Md Idris. (2020, October 26). Performance Evaluation and Viability of a Pedestrian-type Low Land Cabbage Transplanter. Advances in Agricultural and Food Research Journal, 1(2). https://doi.org/10.36877/aafrj.a0000123
  101. Azmon, H., Mail, M. F., Hassan Basri, M. S., Abdul Rahman, N., & Ab Rahim, S. A. (2020, December 4). Optimization of Design and Operational Parameters of a Soil-Dispensing Machine for Preparing Seedling Tray. Advances in Agricultural and Food Research Journal, 1(2). https://doi.org/10.36877/aafrj.a0000143
  102. Muhammad Haniff. A.; Mohd Khusairy. K.; Mohamad Fakhrul Z. O. et al. (2020) Crop cutting test for grain corn cultivation around Malaysia, International Journal of Agriculture, Forestry and Plantation, Vol. 10(Sept) ISSN 2462-1757
  103. Adli Fikri A.S., Rohazrin A.R., MohdKhusairy K , Mohd Nadzim. N.,Mohd Shahmihaizan. M.J..Mohd Fakhrul Zaman.O.,Mohd Fazly. M., Muhammad Haniff.A.,Mohd Humaizi.M.J., Mohd Khairil Izani.I., Ahmad Kamil. Z., Noraznal. Z., Norahshekin. A,R and Norhafizi M. Effectiveness of harvesting patent for grain corn using mini combine harvester (2020). International Journal of Agriculture, Forestry and Plantation, Vol. 10 (Sept) ISSN 2462-1757
  104. Hafidha, A., Mohd Fazly, M., Mohd Taufik, A. and Norahshekin, A.R.Performance Evaluation of a Seed Dispenser for Sowing Seed into Nursery Tray, ASM Sc. J., 13, Special Issue 4, 2020 for NCAFM2018, 118-124
  105. Ahmad, M. T., Khadzir, M. K., & Omar, M. F. Z. (2020, November 20). Performance of a Triangular Rubber Tracked Tractor in Paddy Fields. Advances in Agricultural and Food Research Journal, 1(2). https://doi.org/10.36877/aafrj.a0000132
  106. Mohd Shahril Shah, M.G. et al. (2020) “Implementation of Fertilizer Variable Rate Technology (VRT) of Rice Precision Farming in FELCRA Seberang Perak,” International Journal of Agriculture, Forestry and Plantation, 10(Sept), pp. 349–355. Available at: https://ijafp.com/wp-content/uploads/2020/11/KLIAFP10_039.pdf
  107. Abdul Rahman, M.R., Mat Sarip, A.R. and Baharom, S.N.A. (2020) Thermal and Humidity Management of Mushroom House using Evaporative Cooling, ASM Sc. J., 13, Special Issue 4, for NCAFM2018, 113-117
  108. Tahir M.A, MD Hazeq MR (2020), Composite Wall Insulation PerformanceIn Tropical Environment For Indoor Farming Structure- International Journal of Science, Environment and Technology, Vol. 9, No 5, 2020, 829 – 833
  109. Mohd Noh, A., Mohamad Tahir, M., Mat, S., & Dzulkifli, M. (2020, December 27). CFD simulation of temperature and airflow inside a shipping container size plant factory for optimal lettuce production. Supplementary 6, 4(S6), 54–59. https://doi.org/10.26656/fr.2017.4(s6).039
  110. Mohd Noh, A., Mat, S., Ruslan, M.H., Ibrahim, A. (2020). Analysis on the Effect of Intermittent Ventilation in Solar Drying using CFD Simulation. ASM Sc. J., 13, Special Issue 4, 2020 for NCAFM2018, 104-112
  111. Mat Kahar, S., Voon, C. H., Lim, B. Y., Gopinath, S. C. B., Al-Douri, Y., MD Arshad, M. K., Foo, K. L., Parmin, N. A., & Ten, S. T. (2020, August 27). The effect of graphite type on the synthesis of SiC nanomaterials by microwave-assisted synthesis. Applied Physics A, 126(9). https://doi.org/10.1007/s00339-020-03916-5
  112. Samsuri, N. S. B., Masarudin, M. F. B., & Bookeri, M. A. B. M. (2020) Development of Brown Planthopper Risk Prediction Model., Journal of Agriculture, Foresty and Plantation (10)
  113. Muslimin, J., Bakar, B. A., Abd Rani, M. N. F., Bookeri, M. A., Abdullah, M. Z. K., Ismail, R., & Yasin, L. (2020). Performance evaluation of active canopy sensor for variable rate fertilizer model in paddy production. ASM Science Journal, 13(4), 96-103.
  114. Hassim, S., & Chuah, J. (2020, December 27). Lettuce classification using convolutional neural network. Supplementary 6, 4(S6), 118–123. https://doi.org/10.26656/fr.2017.4(s6).029
 
Buletin Teknologi
  1. Mohd Taufik Ahmad, Bunyamin Abu Kassim, Mohamad Saiful Nizam Azmi, Ramlan Ismail, Muhammad Hariz Musa, Rohazrin Abd Rani, Adli Fikri Ahmad Sayuti, Siti Noor Aliah Baharom dan Badril Hisham Abu Bakar. Kajian Fizikal Buah Nanas Untuk Pembangunan Mesin Penuai Nanas. Buletin Teknologi MARDI Bil. 35 (2023): 9 – 13
  2. Saiful Azwan Azizan, Norzalila Kasron, Wan Mohd Fariz Wan Azman, Mohd Zaimi Zainol Abidin, Amir Redzuan Shamsulkamal, Mohd Hafiz Mohd Amin Tawakkal, Muhammad Aliq Jamaluddin, Sha’fie Alwi, Mohd Azmirredzuan Sani dan Faewati Abdul Karim. Mesin Pembentuk Doh Roti Keramat. Buletin Teknologi MARDI Bil. 35 (2023): 65 – 73
  3. Afiqah Aina Rahim, Amir Syariffuddeen Mhd Adnan, Ishak Hj Hashim, Shafie Alwi, Mohd Zaimi Zainol Abidin, Mohd Hafiz Mohd Amin Tawakkal, Muhammad Aliq Jamaluddin, Ahmad Fadhlul Wafiq Ab Rahman, Amir Redzuan Shamsulkamal, Zainun Mohd Shafie, Sharifah Hafiza Mohd Ramli, Nuraini Ahmad Ariff Shah, Mohd Hafiz Mohd Yusoff, Teoh Chin Chuang dan Masniza SairiPengujian dan penilaian prestasi sistem pengering jenis kebuk condong (inclined bed dryer) untuk pengeringan benih padiBuletin Teknologi MARDI Bil. 38 (2023): 191 – 198
  4. Siti Hawa Ahmad Ramli, Muhd Akhtar Mohamad Tahir, Muhammad Shukri Hassan dan Muhammad Syahiran Afieff AzmanPembangunan sistem aeroponik dengan sistem. pengairan sejuk boleh alihBuletin Teknologi MARDI Bil. 38 (2023): 63 – 71
  5. Saiful Azwan Azizan, Masniza Sairi, Mohd Hafiz Mohd Yusof, Azzami Adam Muhamad Mujab, Amir Syariffuddeen Mhd Adnan, Asnawi Shahar, Wan Mohd Fariz Wan Azman, Nuraini Ahmad Ariff Shah, Sharifah Hafiza Mohd Ramli, Mohd Azrenizal Karim, Muhamad Qarari Ridzwan, Muhammad Syakir A Ghani, Mohd Zaimi Zainol Abidin, Mohd Azmirredzuan Sani dan Ahmad Fadhlul Wafiq Ab Rahman. Pembangunan sistem kebolehkesanan perakuan kualiti benih padi. Buletin Teknologi MARDI Bil. 38 (2023): 43 – 53
  6. Masniza Sairi, Zainun Mohd Shafie, Badaruzzaman Mohamad Noh, Wan Mohd Fariz Wan Azman, Hasmin Hakim Hasbullah, Saiful Azwan Azizan, Afiqah Aina Rahim, Nur Azlin Razali dan Teoh Chin Chuang. Sistem kejuruteraan lepas tuai dan pemprosesan tembikai Buletin Teknologi MARDI Bil. 38 (2023): 11 – 22
  7. Badril Abu Bakar, Mohd. Aufa Mhd Bookeri, Nur Khalidah Zakaria, Mohd Hariz Musa, Mohd. Zamri Khairi Abdullah, Ramlan Ismail dan Muhammad Shukri Hassan. Penggerak utama tanpa pemandu bagi meningkatkan produktiviti dalam pengeluaran tanaman. Buletin Teknologi MARDI Bil. 36 (2023): 93 – 100
  8. Wan Mohd Fariz Wan Azman, Asnawi Shahar, Saiful Azwan Azizan, Afiqah Aina Rahim, Masniza Sairi dan Teoh Chin Chuang. Kajian daya tindakan semasa proses pengupasan kulit buah tembikai. Buletin Teknologi MARDI Bil. 38 (2023): 125 – 134
  9. Asnawi Shahar, Wan Mohd Fariz Wan Azman, Saiful Azwan Azizan, Masniza Sairi, Teoh Chin Chuang, Azzami Adam Muhamad Mujab, Faewati Abdul Karim, Ahmad Fadhlul Wafiq Ab Rahman, Muhammad Aliq Jamaluddin, Mohammad Shukri Johari dan Muhammad Syakir A Ghani Penilaian prestasi keberkesanan sistem teknologi pemprosesan lepas tuai benih padi. Buletin Teknologi MARDI Bil. 36 (2023): 189 – 200
  10. Mohamad Fakhrul Zaman Omar, Mohammad Aufa Mhd Bookeri, Mohd Zamri Khairi Abdullah, Wan Mohd Syafiq Wan Harun, Badril Abu Bakar, Mohd Taufik Ahmad dan Ramlan Ismai.l Kaedah perataan tanah sawah berasaskan sistem satelit navigasi sejagat (GNSS). Buletin Teknologi MARDI Bil. 38 (2023): 55 – 61
  11. Mohd Shahril Shah Mohamad Ghazali, Peter Laga Lium, Mohd Khusairy Khadzir, Chan Chee Sheng, Mohamed Fauzi Md. Isa, Mohamad Haniff Ahmad, Mohamad Fakhrul Zaman Omar, Rosnani Harun, Ayob Hamid, Eddy Herman Sharu, Chong Tet Vun, Mohd Fitri Masarudin, Mazidah Mat, Wahid Said, Rosniyana Ahmad, Azmi ManBuletin. Kajian pengelasan mekanisasi bagi penanaman padi di Batang Lupar. Teknologi MARDI Bil. 38 (2023): 1 – 9
  12. Wan Mohd Aznan Wan Ahamad, Anuar Abdullah, Nurul Afza Karim, Mohd Nur Hafiz Mat Azmin, Khairul Idzwan Ayub dan Mohd Fadly Abdull Rasid. Mekanisasi pengurusan jalaran daun bagi meningkatkan kecekapan operasi penuaian ubi keledek di tanah BRIS. Buletin Teknologi MARDI Bil. 38 (2023): 97 – 106
  13. Zainun Mohd Shafie, Sharifah Hafiza Mohd Ramli, Saiful AzwanAzizan, Hasmin Hakim Hasbullah, Mohd Zaimi Zainol Abidin,Muhammad Aliq Jamaluddin, Mohd Azmirredzuan Sani, Mohd Hafiz Mohd Amin Tawakkal, Ahmad Fadhlul Wafiq Ab Rahman, Sha’fie Alwi dan Amir Redzuan Shamsulkamal. Pengeringan jagung bijian menggunakan alat pengering mudah alih. Buletin Teknologi MARDI Bil. 38 (2023): 31 – 41
  14. Peter Laga Anak Lium, Kaedah Pengapuran Dalam Meningkatkan Kekuatan Tanah Gambut Untuk Mekanisasi Ladang. Bulletin Teknologi MARDI 34/2022
  15. Rohazrin Abdul Rani, Adli Fikri Ahmad Sayuti, Mohd Taufik Ahmad dan Sarif Hashim Sarif Hassan, Pakej teknologi mekanisasi pengeluaran nanas di tanah gambut. Buletin Teknologi MARDI Bil. 34 (2022): 119 – 127
  16. Siti Noor Aliah Baharom, Jusnaini Muslimin, Nur Khalidah Zakaria, Mohd Nizam Zubir, Badril Hisham Abu Bakar, Mohd Nadzim Nordin, Ramlan Ismail, Mohd Hariz Musa, Ahmad Kamil Zolkafli dan Mohd Khairil Izani Ishak. Penggunaan imej dari pesawat tanpa pemandu untuk pemantauan tumbesaran tanaman nanas. Buletin Teknologi MARDI Bil. 34 (2022) 147 – 154
  17. Badaruzzaman, M.N. (2022). Kaedah Penentuan Sifat Dielektrik (Dielectric Properties) Bagi Beras MARDI 76 (MRQ 76). Buletin Teknologi MARDI Bil. 29 (2021): 73 – 79
  18. Masniza, S., Amir Redzuan, S., Azhar, M.N., & etl. (2021). Sistem Penyejukan Evaporatif dalam Pengangkutan Sayuran. Buletin Teknologi MARDI, Vol. 30
  19. Ishak, H., Amir Syariffuddeen, M.A., Azman, H., Yahya S., (2019). Pembangunan sistem pengendalian dan pengawetan ubi keledek VitAto. Bulletin Teknologi MARDI, bil. 19, pp 49 – 64
  20. Saiful Azwan, A., Azman, H., Mohd Khairul Hafifi, M., Mohd Zaimi, Z.A. (2018). Teknologi mekanisasi pemprosesan bepang kacang untuk industri kecil dan sederhana. Buletin Teknologi MARDI, Bil. 13(2018): 49 57
  21. Rohazrin A.R, Adli Fikri A.S., Teknologi Mekanisasi pengeluaran nanas di tanah gambut – Pengubahsuaian traktor sebagai penggerak utama mekanisasi. BuletinTeknologiMARDI Bil. 29 ( 2021) mukasurat 143 – 150
  22. Mohd Shahril Shah, M.G. et al. (2021) “Teknologi Kadar BolehUbah (VRT) PertanianTepatBagiPenanamanPadi (Variable Rate Technology (VRT) of Rice Precision Farming),” in BuletinTeknologi MARDI Bil. 29, pp. 159–169
  23. Khairul Anuar bin Shafie, Muhd Akhtar Mohamad Tahir, Seri 'Aisyah Haasim, Mohammad Abid Ahmad, (2021) Sistem Pemantauan dan kawalan persekitaran dalam kilang tanaman, Buletin Teknologi MARDI Bil.27, m.s 153-157
  24. Muhd Akhtar Mohamad Tahir, Khairul Anuar Shafie, Zulhazmi Sayuti, Muhammad Abid Ahmad, (2021), Model dan Struktur Kilang Tanaman, Buletin Teknologi MARDI, Bil. 27,
  25. Siti Noor Aliah Baharom, Badril Hisham Abu Bakar, Jusnaini Muslimin, Muhammad Zamir Abdul Rasid, Mohammad Aufa Mhd. Bookeri, Norziana Zin Zawawi, Ramlan Ismail, Mohd Zamri Khairi Abdullah dan Muhammad Shukri Hassan, (2020) Penentuan status nutrien tanah menggunakan Sistem Penderia Nutrien Tanah (SoilSense) untuk pembajaan secara kadar boleh ubah tanaman padi Buletin Teknologi MARDI Bil. 22, m.s 103 – 109
Tesis
  1. Mohd Akmal Bin Mhd Yusoff, (2023). Modeling And Predictive Control of Pneumatic Cylinder Actuated by Mckibben Muscles Tesis PhD. Universiti Teknologi Malaysia.
  2. Asnawi, S., (2021). Rheological properties of Euthynnus Affinis surimi added with different concentration and type of salt. Fakulti Sains dan Teknologi Makanan, Universiti Putra Malaysia.
  3. Mohamad Jani, S. (2021). Penghasilan Karbon Teraktif Daripada Sisa Padi Melalui Proses Karbonisasi Dan Aktivasi Kimia Sebagai Bahan Penjerap Cecair Berwarna. Universiti Kebangsaan Malaysia.
  4. Wan MohdFariz WA, (2021). Design And Development Of A Grating Machine For Wet Sago Starch Production. Universiti Putra Malaysia, Malaysia.
  5. Analysis of Pressurized Drip Irrigation System for Vegetable Production. Thesis Master Peter L., Alsidqi H., Marshall K.S., 2019. Evaluation of ground magnesium limestone on the improvement of peat soil strength. MSc Thesis. Universiti Malaysia Sarawak (UNIMAS)
  6. Sharu E.H. (2020) Modeling And Hydraulic Performance Analysis Of Pressurized Drip Irrigation System For Vegetable Production. Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Putra Malaysia.
 
Bab dalam buku
  1. Rosnah S, Wan Mohd Fariz WA, Mohd Zuhair MN, Azman H, 2023. Sagu: Pengenalan, kegunaan dan potensi. Penerbit Universiti Putra Malaysia. 978-967-0035-81-9
  2. Ten Seng Teik. Achieving Agriculture 4.0 Through Modernization and Enhancement with Mechanization, Automation and Advanced Technologies. Springer Nature Singapore, 2023. In Smart Agriculture for Developing Nations: Statu, 49-58, 978-981-19-8738-0. doi.org/10.1007/978-981-19-8738-0_4
  3. Sharifah Hafiza Binti Mohd Ramli. Pengendalian Lepas Tuai Jagung Bijian, Teknologi Pengeluaran Jagung Bijian.48-60, 978-967-936-752-2
  4. Muhd Akhtar Bin Mohamad Tahir. Agrocube: Kilang Tanaman Modular, Kilang Tanaman MARDI Bab 10 Muka Surat: 149-159, No. ISBN: 978-769-936-746-1
  5. Muhd Akhtar Bin Mohamad Tahir. Reka Bentuk Dan Pembangunan Infrastruktur Kilang Tanaman. Bab 3 Muka Surat: 22-47 No. ISBN: 978-769-936-746-1
  6. Wan Mohd Fariz W.A, Azman H., Sarif Hasim S.H., Mohamad Fakhrul Z.O. Ahmad Safuan B., Mohd Shahrir A. 2022. Teknologi Durian MARDI: Mekanisasi Dalam Tanaman 

Hubungi

PENGARAH 
Pusat Penyelidikan Kejuruteraan (ER)
Ibu Pejabat MARDI 

Telefon : 03-8953 6600
No.Faks : 03-8953 6606

  • Dipapar pada 10 November 2022
  • Dikemaskini pada 23 Disember 2024